If it does, please check if the Display Type settings in the GP-Pro EX editor are correct. Please check if the display unit supports Ethernet. (Driver Name): This model does not use EthernetĪn error occurred when a Ethernet driver is selected in GP-Pro EX as the, but the project is transferred to a display model which cannot use Ethernet. (Driver Name): (Port Name) - Received data has framing error If Memory-Link method is used, please check if the Data Length/Parity Bit of host side and the display side have the same settings. Please check the noise suppression and connector's insertion. The cause could be the noise or loose connection. ![]() (Driver Name): (Port Name) - Received data has parity errorĪn error occurred due to a lack of receiving data. ![]() When using multiple drivers, the first 2 letters of the error code may display "RH", "RJ", "RK", or "RM". ![]() For the specific errors of each device/PLC types, please refer to "GP-Pro EX Device/PLC Connection Manual". The following error messages are common to all drivers (device/PLC types).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |